Oil filtration is critical to engine life. Abrasive particles in dirty oil can quickly destroy critical components and ruin precision clearances in an engine if not removed through filtration.
Today’s engines, however, are designed with smaller, lower capacity oil filters which are harder to get to for servicing. This means less efficient filtration and a reluctance to change filters at regular intervals, leading to a buildup of dirt in the oil. The AMSOIL Dual Remote Oil Filtration System is designed to provide superior filtration efficiency, increase oil capacity and improve oil filter accessibility.
Superior Filtration Efficiency
A vehicle’s regular oil filter is a full-flow filter. This means that all the oil pumped by the engine must pass quickly through the filter before it reaches the engine. This high flow demand limits the size of particles conventional filters can effectively remove.
Particle size is measured in units called microns [understand what a micron is]. A good full-flow filter will effectively remove particles down to about 25 microns. But studies have shown that over 60 percent of all engine wear is caused by particles in the 5 to 20 micron range.
AMSOIL By-Pass Oil Filters remove particles down to less than one micron, keeping the oil free of virtually all wear-causing particles.
The dual remote system combines both full-flow and by-pass filtration on one convenient mount. With this system, all the oil is super-filtered more often.
Increased Oil Capacity
The trend to downsize engines over the past several years has significantly reduced oil sump capacities. By installing the dual remote system, oil sump capacity can be increased up to 50 percent.
Marine Dual
Remote
Dual Remote Bypass Oil Filtration Systems specifically for marine applications meeting Coast Gard Requirements. Now Available -- Click Here |
By adding more oil to the system, less strain is put on the oil and its additives. This dramatically increases the oil’s service life.
Improved Accessibility
The dual remote mount is designed to make filter changes easy and convenient. It accomplishes this by using a remote filter mount that is easily installed in an accessible area of the engine compartment. The mount is connected to the engine block by two oil lines and a special spin-on filter adapter.
The cast spin-on adapter replaces the engine’s full-flow filter, using thread adapters that allow the dual remote system to fit about 98 percent of all car and light truck applications in the United States. Ports in the casting provide both a source of oil and a place to return it to the engine.
Increased Filter Size
Many auto manufacturers have been using smaller full-flow filters to help squeeze their engines into tighter engine compartments. But reducing filter size severely limits their service life and holding capacity.
The dual remote mount moves the oil filter away from a tight-fitting area of the engine compartment into one where more room is available. In many installations, it is very likely that a much larger full-flow filter can be used. A larger full-flow filter allows for better oil flow, increased dirt-holding capacity and provides longer service life than a smaller filter does.
Click here for pictures of sample installations.
Oil filtration is critical to engine life. Abrasive particles in dirty oil can quickly destroy critical components and ruin precision clearances in an engine if not removed through filtration.
