AMSOIL Synthetic Thermally Stable Biodegradable Hydraulic Oil (TBI) is a premium lubricant designed to biodegrade to its natural state when subjected to sunlight, water and microbial activity. Synthetic Thermally Stable Biodegradable Hydraulic Oil has a very low toxicity level because the oil is formulated with ashless additives that do not contain heavy metals.
AMSOIL Synthetic Thermally Stable Biodegradable Hydraulic Oil incorporates very high quality synthetic base oils that provide thermal stability, even though they are biodegradable. This oil also contains anti-wear additives that have been thoroughly tested and qualified against stringent hydraulic oil standards including Denison HFO, HF1, HF2, Vickers M-2950-S, l286-S, and Cincinnati Milacron P-68, P-69, and P-70. AMSOIL Synthetic Thermally Stable Biodegradable Hydraulic Oil provides optimum protection for your hydraulics because it prevents wear of the pump and prevents rust of critical components. AMSOIL Synthetic Thermally Stable Biodegradable Hydraulic Oil contains foam inhibitors that quickly release air from the oil.
AMSOIL Synthetic Thermally Stable Biodegradable Hydraulic Oil outperforms vegetable oil-type, biodegradable hydraulic oils because it is based on high quality synthetic oil chemistry tht lasts longer and withstands heat better. This ensures problem-free operations.
Performance Features
 80% Biodegradable Within 21 days (CEC L-33-T-82)
Thermally Stable
Resists Oxidation
Prevents Rust and Foam
-52 deg. F pour Point for Cold Temperature Performance
Outperforms Vegetable Type Bio-Hydraulic Oils |
AMSOIL Synthetic Thermally Stable Biodegradable Hydraulic Oil is recommended for gear, vane and piston stationary and mobile hydraulic systems. AMSOIL Synthetic Thermally Stable Biodegradable Hydraulic Oil is a multi-viscosity, SAE 5W-20 oil and is recommended for use in place of either ISO-32 or ISO-46 hydraulic oils.
AMSOIL Synthetic Thermally Stable Biodegradable Hydraulic Oil is essentially compatible with typical hydraulic oils and small amounts of contamination (lines, residue) is acceptable. However, it is recommended that systems be drained prior to installing AMSOIL Synthetic Thermally Stable Biodegradable Hydraulic Oil, Excessive system contamination will minimize its biodegradability effectiveness.
AMSOIL Synthetic Thermally Stable Biodegradable Hydraulic Oil is especially well suited for applications where environmental contamination due to leaking or blown hydraulic lines presents an environmental hazard.
AMSOIL Synthetic Thermally Stable Biodegradable Hydraulic Oil has been tested and found compatible with Nitrile (Buna-N), poly Acrylate, Flourocarbon (Vitron) and Silicone seals which are commonly found in hydraulic systems. When using systems containing seals not listed, please contact Pecuniary, Inc. for additional information.
The ability of AMSOIL Synthetic Thermally Stable Biodegradable Hydraulic Oil to extend drain intervals and excel in performance is subject to operating conditions and maintenance practices. Monitoring by oil analysis is recommended.
AMSOIL industrial lubricants are formulated to exceed accepted industry specifications. AMSOIL warrants that the use of its lubricants will not cause mechanical damage to any mechanically sound equipment when AMSOIL products are used in full compliance with the company’s recommendations. However, the purchaser of these lubricants is responsible for determining if these specifications are adequate and proper for the intended application. The AMSOIL warranty is limited to lubricant performance consistent with indicated specifications. No additional warranty, expressed or implied, can be made.
