Saber Professional & Outboard Synthetic 100:1 Pre-Mix 2-Cycle Oils
AMSOIL Saber Professional (ATP) and Outboard (ATO) Synthetic 100:1 Pre-Mix 2-Cycle Oils are formulated with exclusive AMSOIL synthetic base oils and premium additives. Designed for lean mix ratios in two-cycle motors, Saber 2-Cycle Oils have excellent lubricity and cleanliness properties, controling friction and preventing wear, plug fouling, ring sticking and exhaust port blocking. AMSOIL Synthetic 100:1 2-Cycle Oils have been protecting and providing improved performance in two-Cycle motors since 1973.
Saber Professional
Saber Professional (ATP) is specifically designed for small engines including, but not limited to, chain saws, lawn equipment, blowers, chop saws, pumps, scooters and go-carts. It is also very good for use in motorcycles, snowmobiles, ATVs, jet boats and personal watercraft. Saber Professional is formulated with high temperature detergent additives that prevent hard carbon deposits from forming in these hot operating motors. Saber Professional is "smokeless" and delivers as much as 30 percent fewer emissions at 100:1 mix ratios than oils mixed at 50:1. Equipment operators subjected to smoke and fumes will benefit from these low emissionproperties. Becuase one mix ratio satisfies multiple pieces of equipment, Saber Professional eliminates mix ratio confusion. Saber Professional is recommended for pre-mix where ISO-L-EGD, JASO FC or API TC is specified.
Saber Outboard
Saber Outboard (ATO) is specifically designed for outboard motors. It is also very good for personal watercraft, jet boats, motorcycles, snowmobiles and ATVs. Saber Outboard contains a heavy dose of lower temperature dispersant additives that excel at preventing varnish and deposits from forming in water-cooled motors. Saber Outboard is a very low smoke, low odor, low toxicity product that produces as much as 30 percent fewer emissions at 100:1 mix ratios than oils mixed at 50:1. It is ideal for trolling motors as it prevents "oil loading" and plug fouling for rapid throttle response. Operators and the environment benefit from the use of Saber Outboard. It is recommended for pre-mix use where TC-W3 or API TC is specified.
Typical Technical Properties
| |
ATP |
ATO |
Kinematic Viscosity @ 100 deg. C, cSt (ASTM D-455) |
11.9 |
13.4 |
| Kinematic Viscosity @ 40 deg. C, cSt (ASTM D-455) |
78.2 |
91.3 |
| Viscosity Index (ASTM D-2270) |
145 |
148 |
| Pour Point, deg. C, (deg. F) (ASTM D-97) |
-38 (-36) |
-36 (-33) |
| Flash Point, deg. C, (deg. F) (ASTM D-92) |
101 (214) |
102 (216) |
| Fire Point, deg. C, (deg. F) (ASTM D-92) |
107 (225) |
106 (223) |
Applications
AMSOIL Saber 100:1 2-Cycle Oils are recommended for 100:1 mix ratios in normal service and 50:1 to 80:1 mix ratios in severe service applications such as commercial equipment operations and racing.
AMSOIL 2-Cycle Oil Recommendations
| AMSOIL 2-Cycle Oil |
Outboard* |
Snowmobile*,
Motorcycle* & ATV* |
Personal Watercraft*
& Jet Boat* |
Chain Saw,
Chop Saw & Pump |
Weed Eater, Blower
& Lawn Mower |
Moped, Scooter
& Go-Cart |
HP Injector (HPI)
TC-W3, API TC
(Injection or 50:1 Pre-Mix) |
Excellent |
Very Good |
Very Good |
Not Recommended |
Not Recommended |
Not Recommended |
INTERCEPTOR (AIT)
API TC, JASO FC |
Not Recommended |
Excellent |
Excellent |
Good |
Good |
Good |
DOMINATOR (TDR)
API TC, JASO FC |
Racing (1) |
Racing (2) |
Racing (2) |
Very Good |
Very Good |
Very Good |
Saber Professional 100:1
Pre-Mix (ATP) ISO-L-EGD,
JASO FC, API TC |
Not Recommended |
Very Good
Pre-Mix Only |
Very Good
Pre-Mix Only |
Excellent |
Excellent |
Excellent |
Saber Outboard 100:1
Pre-Mix (ATO) TC-W3, API TC |
Excellent
Pre-Mix Only |
Very Good
Pre-Mix Only |
Very Good
Pre-Mix Only |
Not Recommended |
Not Recommended |
Not Recommended |
Equipment manufacturers and motor builders have redesigned two-cycle motors to reduce emissions and increase fuel economy. These changes have increased operating temperatures, reduced oil consumption and incorporated direct fuel injection and exhaust power valves. AMSOIL 2-Cycle Oils are designed to maximize performance in all types of engine designs and are optimized for select applications.
Even though AMSOIL 2-Cycle Oils have been optimized for specific applications, they are multi-functional and recommended for use in many areas. The chart rates each oil's performance abilities per application as follows:
Excellent: The primary recommendation for the oil. The oil is specifically designed for the operating conditions of the motors in these markets. There is only one "Excellent recommendation per category.
Very Good: A main recommendation for the oil. Identifies an oil that is very good for the operating conditions of these motors.
Good: A secondary recommendation for an oil. The oil was not specifically designed for these applications. However, the chemistry in the oil is suited to the operating conditions for these motors.
Not Recommended: Identifies applications where the product was not inteded for use.
Racing:
- Not recommended for long-term use in outboard motors as a TC-W3 type oil, although excellent as a race oil for short term use where motors are periodically inspected.
- Excellent for racing or modified motors. Very good for recreational use.
*Recommended for all direct fuel injected (DFI), electronic fuel injected (EFI) and carbureted motors. Outboard motors include Mercury®. Optimax®, Johnson® & Evinrude® FICHT® & E-TECtm, Yamaha® HPDI, Nissan® & Tohatsu® TLDI®.
|
